Видео

You're Welcome :-) For more topics subscribe to our channel, ruclips.net/channel/UCvTQ6WM-MSvCFVNCEtI6HPg

Thanks for the feedback :-) For more topics subscribe to our channel, ruclips.net/channel/UCvTQ6WM-MSvCFVNCEtI6HPg

Surely we will make video based your topic ASAP.

@@linuxhelp5096 good morning Thank you.

Thanks for the feedback :-) For more topics subscribe to our channel, ruclips.net/channel/UCvTQ6WM-MSvCFVNCEtI6HPg

Welcome :-) For more topics subscribe to our channel, ruclips.net/channel/UCvTQ6WM-MSvCFVNCEtI6HPg

Below steps will help you to configure WinSCP and filezilla with SFTP. WinSCP : Launch WinSCP Go to "Site Manager" in the toolbar, or press Ctrl+Shift+S Click "New Site" Fill in the details for your SFTP server: Host name: Your server's hostname or IP address Port number: The port that your SFTP server is listening on (default 22) User name: Your username to log into the server with Password: Leave blank if using public key authentication, otherwise enter your password Protocol: Choose "SFTP" Save FileZilla : Launch FileZilla Client Go to "Site Manager" in the toolbar, or press Ctrl+Shift+S Click "New Site" Fill in the details for your SFTP server: Host: Your server's hostname or IP address Port: The port that your SFTP server is listening on (default 22) Protocol: Choose "SFTP" User: Enter your username to log into the server with Password: Leave blank if using public key authentication, otherwise enter your password Save

No, It's not necessary to install vim text editor. You can also other text editor. If you want to install vim text editor you can use the following command to install vim text editor. apt update apt install vim -y

1. Prepare the New Server Install Samba: Install Samba on your new server. sudo apt update sudo apt install samba samba-common-bin Install LDAP Client Tools: Install necessary LDAP client packages. sudo apt install ldap-utils 2. Configure LDAP Integration on the New Server vim /etc/nsswitch.conf Example: passwd: compat ldap group: compat ldap shadow: compat ldap Example PAM configuration (e.g., /etc/pam.d/common-auth): auth required pam_env.so auth sufficient pam_ldap.so auth required pam_unix.so nullok try_first_pass 3. Copy Samba Configuration Backup and Transfer Configuration: Backup the Samba configuration (/etc/samba/smb.conf) from your current server and copy it to the new server. Ensure that paths and server-specific settings are updated accordingly. sudo cp /etc/samba/smb.conf /path/to/backup/ Copy this backup to the new server and replace the existing configuration file. Update Configuration: Modify the configuration on the new server to reflect any new settings or changes. For example, update IP addresses, hostnames, or any domain-specific settings. 4. Migrate Samba Data Stop Samba Services: On the old server, stop Samba services before copying the data to avoid any conflicts. sudo systemctl stop smbd sudo systemctl stop nmbd Copy Samba Directories: Copy the Samba database and relevant directories from the old server to the new server. sudo rsync -avz /var/lib/samba/ /newserver/var/lib/samba/ sudo rsync -avz /path/to/your/shared/data/ /newserver/path/to/shared/data/ Make sure permissions and ownership are preserved during the copy. 5. Update LDAP Configuration Ensure LDAP Integration: Verify that the LDAP settings in the new Samba configuration are correct. Ensure that the passdb backend or ldap configurations match your LDAP server details. 6. Test the New Server Start Samba Services: Start Samba services on the new server. sudo systemctl start smbd sudo systemctl start nmbd Test Authentication and Access: Verify that users can authenticate and access shared resources correctly. Test from both Windows and Linux clients. smbclient -L localhost -U username Check Logs: Monitor Samba and LDAP logs for any errors. sudo tail -f /var/log/samba/log.smbd sudo tail -f /var/log/samba/log.nmbd sudo tail -f /var/log/syslog 7. Switch Over Update DNS and Network Settings: If applicable, update DNS entries and network settings to point to the new server. Communicate Changes: Inform users about the migration and any changes they may need to be aware of. Monitor: Continue to monitor the new server for any issues and ensure everything is functioning as expected.

@@linuxhelp5096 thanks!!!

Recommended Solutions: Separate GitLab User Accounts. Isolates GitLab access. Two-factor authentication (2FA) Enable 2FA additional verification step (e.g., SMS, app) after entering the LDAP password. REF: docs.gitlab.com/ee/user/profile/account/two_factor_authentication.html Dedicated GitLab Access Tokens: Create personal access tokens for each user with specific permissions for GitLab. Users can use these tokens instead of passwords. REF: docs.gitlab.com/ee/user/profile/personal_access_tokens.html

Welcome :) For more topics subscribe to our channel, ruclips.net/channel/UCvTQ6WM-MSvCFVNCEtI6HPg

Sure, we will make video for above topic asap.

@@linuxhelp5096 thank you I wait.

Thanks for the feedback :-) For more topics subscribe to our channel, ruclips.net/channel/UCvTQ6WM-MSvCFVNCEtI6HPg

You can use either of these two modules to execute the .exe file, depending on your preference. win_powershell: This module allows you to run PowerShell commands and scripts. Install the powershell package using pip: pip install powerShell Use a win_powershell task in your playbook: win_powershell: args='C:\Path\To\Your\exe_file.exe' win_command: This module allows you to run arbitrary Windows commands. Use a win_command task in your playbook: `win_command: name=Execute exe file, command='C:\Path\To\Your\exe_file.exe'

Thanks for the feedback :-) For more topics subscribe to our channel, ruclips.net/channel/UCvTQ6WM-MSvCFVNCEtI6HPg

Thanks for the feedback :-) For more topics subscribe to our channel, ruclips.net/channel/UCvTQ6WM-MSvCFVNCEtI6HPg

@@linuxserver3784 hey thanks for the reply. What I wanted to know was the role of MariaDB. I am seeing the data stored in MySQL itself and I am not at all seeing anything related to MariaDB.

Binaries will be same for both mariadb and mysql , but the way mariadb stores data and handle function in different way.

In this video we are using the Mariadb server, you can also use Mysql as your database server.

The error is too generic and does not tell you exact problem. The first thing you need to know about the http error is that the error can only be resolved by fixes to the Web server software. It is not a client-side problem meaning that the problem is not with your browser, your computer, or your internet connection. The error is too generic and does not tell you exact problem. When you hit an internal server error it usually means some parts of your web server is not configured correctly or the application is trying to do something and the server is failing to carry out the request due to a conflict or restriction. Please check the error logs on your server for a more specific error message, which may give a clue to why this is happening on your website/server. These errors are often caused by plugin or theme function conflicts, so if you have access to your Dashboard, try deactivating all plugins. It is up to the administrators of the Web server site to locate and analyse the logs which should give further information about the error. However, there are often ways to quickly get around the problem: Reload or Refresh the Webpage. Check you server permission. Corrupt Plugins. .htaccess file may be corrupt. Exceeded PHP memory limit. Increase the memory setting in the wp-config.php file. Clear your browser cookies and cache

There will be possibilities of data loss on the disk when the VM is not properly shutdown ,and also lead to data corruption when the VM is force shutdown.

@@linuxhelp5096 thank you

Go to the Azure Pricing Calculator. Select Storage as the resource category. Choose Data disks (also known as Managed Disks) from the list of available resources. Enter your usage details, such as: Storage size (in GB or TB) Location Subscription type (e.g., Pay-As-You-Go, Reserved Instances) Click on Calculate to get an estimated cost based on your input

@@linuxhelp5096 thank you

Thanks for the feedback :-) For more topics subscribe to our channel, ruclips.net/channel/UCvTQ6WM-MSvCFVNCEtI6HPg

That is taken from your remote server's user credentials. You can connect with other usernames also. But that username(user) must be in that remote server.

Thanks for the feedback :-) For more topics subscribe to our channel, ruclips.net/channel/UCvTQ6WM-MSvCFVNCEtI6HPg

Thanks for the feedback :-) For more topics subscribe to our channel, ruclips.net/channel/UCvTQ6WM-MSvCFVNCEtI6HPg

Make sure ts3server executable has execute permissions You may want to try running the script manually with the full path Make sure that the ts3server executable is located in a directory that is included in the system's PATH

Using the Podman page in the web console, Cockpit administrators can monitor and manage containers, pods, and images on a host system. The Podman page provides configurable options that enable administrators to create containers and pods, and download Podman images.

Clear your browser cache and try again & Ensure that the user has the necessary permissions to view attachments

@@linuxhelp5096 thank you for your response.. may i know waht type of browser u use? cause im using chrome and i did do what you say but still the error occured :(

The IP I have entered is my Asterisk server IP That tool is called MicroSIP which is used for softphone apllication Thank you for your appreciation You can see more video's on Asterisk use the following link. www.youtube.com/@linuxhelp5096/search?query=asterisk

Thanks for the feedback :-) For more topics subscribe to our channel, ruclips.net/channel/UCvTQ6WM-MSvCFVNCEtI6HPg

Welcome :-) For more topics subscribe to our channel, ruclips.net/channel/UCvTQ6WM-MSvCFVNCEtI6HPg

By using "identified by 123456" we are set the password for neos_usr. Here "123456" represents the password. You can use different and strong password.

We also not used to recommended for disable firewall, since it's used for this tutorial alone. We recommend our firewall related tutorials to secure the server www.youtube.com/@linuxhelp5096/search?query=csf

Sure, we will make a video for the above topic asap.

Thanks for the feedback :-) For more topics subscribe to our channel, ruclips.net/channel/UCvTQ6WM-MSvCFVNCEtI6HPg

Sure, we will make a video for the above topic asap.

@@linuxhelp5096 thanks for that

Go to Network > Interfaces. Click Create New > Interface. Configure the interface fields: Enter the name of the WAN interface. Select the role to WAN. Select the Addressing mode Manual. Enter the public IP and Netmask in IP/Netmask

Go to Network > Interfaces. Click Create New > Interface. Configure the interface fields: Enter the name of the WAN interface. Select the role to WAN. Select the Addressing mode Manual. Enter the public IP and Netmask in IP/Netmask

You're Welcome!! For more topics subscribe to our channel, ruclips.net/channel/UCvTQ6WM-MSvCFVNCEtI6HPg

Yes It was pronounced as T-UPTIME

Azure Database for MySQL server services included for free with your Azure free account unless you exceed the free service limits. IF continues Running MYSQL service Free service limits Reached. That's the reason delete all the resource groups related to the SQL Server. Based on your Production Requirement.

Installing zabbix 7 on ubuntu is a myth - simply does not work - no matter which guides you follow, and despite no errors showing during installation steps.

Check whether PHP and Apache are installed properly Check the Zabbix services are up Check whether the web server's port is listening and is accessible to the client machine Try once with Zabbix 6.x

To install Issabel on a Linode server, you can follow these general steps. Issabel is based on CentOS and uses Asterisk as its PBX engine. Step-by-Step Guide to Install Issabel on Linode: 1. Create a Linode Instance: Log in to your Linode account. Create a new Linode instance (virtual server). Choose a distribution: Select CentOS as the operating system. 2. Connect to Your Linode: Once your Linode instance is created, you will need to connect to it via SSH. Use an SSH client such as PuTTY (for Windows) or Terminal (for macOS/Linux) to connect. 3. Update CentOS: After connecting via SSH, update your CentOS system: sudo yum update 4. Prepare Your Linode: Install some necessary packages: sudo yum install epel-release wget 5. Download Issabel Installation Script: Issabel provides a script to automate the installation process. Download it using wget: wget repo.issabel.org/issabel4/public/x86_64/issabel4-repo-4.0.0-1.noarch.rpm 6. Install Issabel Repository: Install the Issabel repository using the downloaded RPM package: sudo rpm -Uvh issabel4-repo-4.0.0-1.noarch.rpm 7. Install Issabel: Now, install Issabel using YUM: sudo yum install issabel-all During the installation, you will be prompted to configure some settings. Follow the on-screen instructions. Access Issabel Web Interface: After the installation is complete, you can access the Issabel web interface using your Linode's IP address: <your_linode_ip> This is the procedure to install issabel in linode server. Your feedback is much welcome.

You can download the postgresql11 source code from www.postgresql.org/ftp/source/v11.22/ You can compile using the steps dev.to/dukeofhazardz/installing-postgresql-from-source-code-full-installation-guide-1f6j

thank you so much for your help ❤❤

Thanks for the feedback :-) For more topics subscribe to our channel, ruclips.net/channel/UCvTQ6WM-MSvCFVNCEtI6HPg

Thanks :-) For more topics subscribe to our channel, ruclips.net/channel/UCvTQ6WM-MSvCFVNCEtI6HPg

Issabel -> PBX -> PBX Configuration -> Outbound routes Add the any prefix digit and dial with this prefix before dialing outbound number Dial Patterns that will use this Route Add Your trunk in Trunk sequence Trunk Sequence for Matched Routes Remove if any pattern match is configured